Beam Engineers

Remove

Image

Item

Qty

Slotted Masses With Rack

These precision made mass sets are made from brass. The masses are finely adjusted, marked and mounted on a simple rack with handle.

-01 Set of twelve masses:	1x500g, 2x200g, 1x100g, 1x50g, 2x20g 1x10g,1x5g, 2x2g, 1x1g
-02 Set of ten masses:	1x500g, 5x100g, 1x50g, 2x20g, 1x10g
-03 Set of eight masses:	1x500g, 2x200g, 1x100g, 1x50g, 2x20g, 1x10g

Triple Balance

A single pan, low form balance that has three notched beams with center indicating sliding masses giving total weighing capacity of 610g. The capacity can be extended to 2610g with supplementary masses. Spring loaded zero adjust compensator and magnetic damping are provided. Stainless steel pan is of 150mm diameter.

Beams:	0-500g x 100g 0-100g x 10g 0-10g x 0.1g
-01	Set of Supplementary Masses to extend the range of the balance to 2610g capacity.
-02	Support Rod for under weighing facility.
-03	Un-calibrated Tare Beam of capacity 200g.

Masses Iron

Hexagonal masses provided with suspension ring.

-01	100gm
-02	200gm
-03	500gm
-04	1000gm

Slotted Brass Masses on Carrier

Each set consists of nine equal masses on a carrier of the
same mass.

-01	Set of 10g masses, total 100g
-02	Set of 20g masses, total 200g
-03	Set of 50g masses, total 500g
-04	Set of 100g masses, total 1000g

Double Beam Balance

Two pan balance for accurate and rapid weighing up to 2000g
when used with supplementary masses. The balance has center indicating sliding masses to weigh up to 210g, spring loaded zero adjust compensator and magnetic damping. Stainless steel pans are of 150mm diameter.

Beams:	0 to 200g x 10g 0 to 10g x 0.1g
-01	Set of Supplementary Masses 1 kg, 500g, 200g and 100g
-02	Support Rod for under weighing facility.
-03	Un-calibrated Tare Beam of capacity 200g.

Four Beam Balance

A high-form balance with four beams, each provided with a non-removable
sliding mass, has total weighing capacity of 311g. No additional mass is required. Provided with spring loaded zero adjust compensator and magnetic damping, it has a pan of 90mm diameter with two pouring spouts and handle. Height of stirrup approx. 180mm. A platform housed in the base can be used for density determination.

Beams:

0-200 x 100g
0-100 x 10g
0-10 x 1g
0-1 x 0.1g
RM5012